breakawaycleaned2

See our product in action

The Breakaway starts from the raised position in most applications. Upon receiving a signal from an access control system or push button, the bollard(s) lower simultaneously to provide access for one vehicle. After the vehicle has cleared the safety zones, the bollard(s) raise to the upright position.

Breakaway Stationary Bollards

Request for more detailed info.

pdfDownload the PDF Version of this page.

Overview

A break-away stationary bollard is a fixed bollard composed of a sub surface element inbeded into concrete and a break-away tube connected to the base unit by an Aluminum screw of variable diameter. The standard AL screw has been designed to resist impacts up to 30Kj. The screw serves as a fuse and breaks under high kinetic energy impact. The bollard tube will fall off and can be screwed back onto the base using a replacement screw.

Description

The eGuardian Fixed (Stationary) Breakwaway Bollard - Model B-2FB is designed to compliment the Automatic and Manual versions of the eGuardian bollard series. With the same height, diameter, finish and impact resistance, the Fixed eGuardian can be installed to the sides of the traffic lane or in other areas where vehicle access is not required.

Specifications

Bollard and carriage made of steel or stainless steel. Bollard secured to the carriage by variable number of screws in different materials. Flat (Round) cover made of cast iron (1/2" thick) secured with steel screws.

Dimensions

Matches Automatic or Manual bollards arround

Picture

b-2fb fixed