hydraulic blg05 1 bol small

 

See our product in action

The eDefender starts from the raised position in most applications. Upon receiving a signal from an access control system or push button, the bollard(s) lower simultaneously to provide access for one vehicle. After the vehicle has cleared the safety zones, the bollard(s) raise to the upright position. Optionally this bollard has an Emergency Deployment mode which allows for very fast upward motion of the bollard when an emergency occurs.

eDefender Electrohydraulic Automatic Bollards

Request for more detailed info.

pdfDownload the PDF Version of this page.

Overview

The eDefender™ Model BLG-05 bollard is an automatic retractable bollard that operates using an internal hydraulic actuator. The standard operation starts from the up position. Upon receiving an input from an external access control system or button, the bollards lower into the down position (in the ground). After the vehicle has passed through the security zone, the bollards raise to the up position and lock. The eDefender™ Model BLG-05 bollard operates (up or down) in 4 seconds and can be cycled up to 180 cycles per hour.

This bollard has been certified as per the ASTM standard F-2656-07 as an M50-P2 crash rated bollard. (Certificate available upon request).

Description

Dry Contact input from external system:

  • Card Reader System.
  • Remote Transmitter.
  • RFID.
  • Guard Station Push Button.
  • Knox Box – Emergency Siren / Strobe Sensor.

4-5 seconds up.

Safety Features

Vehicle Detectors with Memory, 3M Reflective Stripes, LED Lights on top of bollard.

Fail-Safe Design

Bollards retract during power failure.

Controls

30” x 36” x 10” interior or exterior panel to be located within 200 ft of bollards. One panel for up to 6 bollards.

Specifications

Operation

Hydraulic actuator.
Power Supply: 208V, 1 ph 60Hz w/ N, G  60A circuit (for up to 6 bollards).
Operational Conditions

Fully water-resistant – IP68 Rated;
Can operate submerged for up to 1 hr.
Drainage required at 1 gallon/min.
Operating Temperatures

-15°C to 54°C ( 0°F to 130°F).
Operational Frequency

180 operations per hour ; 1,500,000 MCBF.
Materials

ST-52 Steel.

Dimensions

Bollard – 11” dia. X 39” tall.
Excavation Depth: 84” (allows for drain).

Installations

blg05 install

Options

Finish Treatment:

Bollards supplied in powder-coated finish, Galvanized or Stainless Steel.
All painted equipment treated with anti- corrosion before painting.

Optional :

UPS system keeps bollards up and locks engaged. Once lowered, bollards stay down until power restored.

Picture

b-1ah taj india

Drawing

eDefender 1000 mm high bollard K4, K8 or K12 design.

See-more