bollard eGuardian

 

See our product in action

The eGuardian starts from the raised position in most applications. Upon receiving a signal from an access control system or push button, the bollard(s) lower simultaneously to provide access for one vehicle. After the vehicle has cleared the safety zones, the bollard(s) raise to the upright position.

eGuardian Manual Bollards B-2M

Request for more detailed info.

pdfDownload the PDF Version of this page.

Overview

semi-auto-option-bluecopy

A High Impact Bollard for Low-Use Applications!

The eGuardian - Model B-2M Manual Bollard is a retractable bollard that lowers by unlocking and applying manual pressure and raises using a gas jack.

This 20 or 32"" tall x 10" or 10.75" diameter bollard is ideal for applications that require a high resistance to impact but infrequent use.

Description

  1. Casing; Material: steel or reinforced aluminum cast.
  2. Adjustable guides; Material: stainless steel.
  3. Pneumatic Jack or counterweight system depending on associated Automatic retractable unit.
  1. Casing; Material: reinforced aluminum cast.
  2. Bumpers (absorbs some of the impact energy) Material: polyurethane.
  3. Soft polyurethane slides(absorb some of the impact energy).
  4. Screws (number depends on desired choc resistance).
  5. Motorized carriage type IP68; Material: cast iron alloy.
  6. Guides; Material: Aluminum.

Specifications

Bollard type

Manual retractable bollard.
Operation

Lowered by unlocking and pushing down using foot pressure; raised by unlocking and being lifted by a gas jack installed in the casing.
Guidance

Four 1.5" thich, low-friction polyurethane slides ride on two adjustable stainless steel guides (10 NC 12 tempered 65 daNmm 2).
Materials

Bollard and carriage made of cast iron secured to the carriage by 10 stainless steel screws. Flat cover made of cast iron (1/2" thick) secured with 4 steel screws.

Includes 1/4" nylon brush.
Corrosion Protection

Bollard casing and cover electroplated after sandblasting, powdercoated in any RAL color.
Safety

3M reflective stripe on the upper part of the bollard.
No mechanism in the upper part of the bollard; all mechanical parts are 1" under the ground level when bollard is in the upper position.
Bollard is fully waterproof and is designed to operate submerged for short periods of time. Drainage must be supplied to drain the case at the rate of 1 gal / minute.
Impact security

Bollard can sustain an impact of 30,000 joules in the direction of travel without damage (and continue to operate).
Performance

Can be raised or lowered within 10 seconds of unlocking.
Reliability

120 operations per hour; 1,500,000 operations MCBF.

Dimensions

eg-dimensions

Diameter 10"; height: 20" /32"/ 39"; weight of moving bollard from 290 lbs.


 

Installations

Automatic Bollard Systems provides installation supervision services or complete installation services for the eGuardian Manual Bollard.Before any concrete is poured, please ensure that bollard cases are:
  • Installed level to ground and each other (even on sloped roads).
  • Connected to a drainage system that will allow bollard case to drain at a rate of 1 gallon/minute.
  • Positioned so that the stainless steel guide rails are parallel to the direction of vehicle traffic.

Installation Drawings and Manuals are available upon request.

Options

Customize the Appearance of your Bollards!

The eGuardian Model B-2M Manual Bollard has the following options available:

  • Bollard Finish Color (RAL Color Chart or color match).
  • 3M Reflective Stripe Color (White/Yellow).
  • Stainless Steel Covers.

Picture

b-2mb seattle pacific univ

Drawing

See-more